• sitemap

Chemical ProductsThere are 45 products.

-- Price: lowest first Price: highest first Product Name: A to Z Product Name: Z to A In-stock first Sort by

• 

  Part# 2130B

  3M Flame Retardant Compound - 7.6Oz

  Flexible urethane resin compound Colour: black Permanent when solid Gel for about 15 mins RoHS compliant

  $51.02
  

  Add to cart View
• 

  Part# MCL5S-H6

  CaiLube MCL 5% Aerosol Lubricant Spray

  Precision lubricant for moving carbon or plastic compounds Compatible with most materials, though compatibility testing recommended for larger-scale applications Assists in removing contaminants w/o harm to plastics and elsastomers Not a deoxidizer or cleaner  

  $21.85
  

  Add to cart View
• 

  Part# 18490

  Loctite Tak Pak Acetone Based Accelerator - 1.75Oz

  Increses speed and gap filling capabilities of cyanoacrylate adhesives Will not whiten the exterior border of adhesive Dries in less than 30 seconds

  $13.82
  

  Add to cart View
• 

  Part# C01716

  LPS Food Grade Silicone Luricant - 10Oz

  Meets requirements for NSF H1 registration #112815 Meets FDA regulation 21 CFR 178.3570 for Incidental Food Contact Acceptable for use in Canadian food processing establishments Ideal for releasing molded parts Won't attract dust or dirt Does not contain chlorinated solvents Excellent...

  $12.65
  Contact MRO

  Add to cart View
• 

  Part# 02016

  LPS TKX All-Purpose Lubricant - 11Oz

  NSF Registered Category Code H2 Registration # 059842 Nonconductive High flash point Safe on most surfaces Displaces moisture

  $9.40
  

  Add to cart View
• 

  Part# 419B-340G

  MG Chemicals Acrylic Lacquer Conformal Coating - 340G

  Durable finish product Provides all round protective coating for printed circuit boards Protects against moisture, corrosion, and thermal shock Protects and insulates electrical and electronic components and assemblies Easy to repair Aerosol

  $18.76
  

  Add to cart View
• 

  Part# 846-80G

  MG Chemicals Carbon Conductive Grease - 80g

  Lubricates and improves electrical and thermal connections between sliding surfaces Provides protection from moisture and corrosion Prevents normally closed switches from corroding in place Reduces make-break arching and fitting of switch contact surfaces Reduces EMI noise

  $14.01
  

  Add to cart View
• 

  Part# 415-500ML

  MG Chemicals Ferric Chloride Copper Etchant - 500mL

  Ready-to-use solution Do not dilute Etches a maximum of 100g of copper per liter of solution Process can be sped up by heating - do not heat higher than 55°C (135°F)

  $9.72
  Contact MRO

  Add to cart View
• 

  Part# 4190-GP

  MG Chemicals Green Overcoat Pen

  Green coating Protects printed circuit boards against moisture, corrosion, and thermal shock Protects and insulates electrical and electronic components and assemblies Convenient pen applicator for precision work Easy to repair UV indicator added for O.C. inspection

  $10.27
  

  Add to cart View
• 

  Part# 8703-10ML

  MG Chemicals High Strength Permanent Threadlocker - 10mL

  For fasteners up to 1" Prevents vibrational loosening Only cures in the absence of air, making cleanup of excess product easy Threadlockers produce lubricity to achieve controlled torque during assembly and operation Holds critical clamp load pressures under the most severe environments RoHS...

  $8.63
  

  Add to cart View
• 

  Part# 8704-10ML

  MG Chemicals High Strength Wicking Threadlocker - 10mL

  For fasteners up to 1" Ideal for post application to preassembled fasteners Prevents vibrational loosening RoHS Compliant

  $8.84
  

  Add to cart View
• 

  Part# 824-100ML

  MG Chemicals Isopropyl Alcohol - 100mL

  General all-purpose cleaner Safe on plastics 99.953% Pure Anhydrous

  $6.07
  

  Add to cart View
• 

  Part# 824-1L

  MG Chemicals Isopropyl Alcohol - 1L

  General all-purpose cleaner Safe on plastics 99.953% Pure Anhydrous

  $14.52
  

  Add to cart View
• 

  Part# 824-450G

  MG Chemicals Isopropyl Alcohol - 450g

  General all-purpose cleaner Safe on plastics 99.953% Pure Anhydrous

  $13.42
  

  Add to cart View
• 

  Part# 824-500ML

  MG Chemicals Isopropyl Alcohol - 500mL

  General all-purpose cleaner Safe on plastics 99.953% Pure Anhydrous

  $9.12
  

  Add to cart View
• 

  Part# 421-500ML

  MG Chemicals Liquid Tin - 500mL

  Quickly tinplates copper circuits on PC boards Liquid

  $39.99
  

  Add to cart View
• 

  Part# 8701-10ML

  MG Chemicals Low Strength Removable Threadlocker - 10mL

  For fasteners up to 1/4" Prevents vibrational loosening Only cures in the absence of air, making cleanup of excess product easy Threadlockers produce lubricity to achieve controlled torque during assembly and operation Holds critical clamp load pressures under the most severe environments RoHS...

  $8.93
  

  Add to cart View
• 

  Part# 8701-50ML

  MG Chemicals Low Strength Removable Threadlocker - 50mL

  For fasteners up to 1/4" Prevents vibrational loosening Only cures in the absence of air, making cleanup of excess product easy Threadlockers produce lubricity to achieve controlled torque during assembly and operation Holds critical clamp load pressures under the most severe environments RoHS...

  $31.35
  

  Add to cart View
• 

  Part# 8702-10ML

  MG Chemicals Medium Strength Removable Threadlocker - 10mL

  For fasteners 3/4" or smaller Prevents vibrational loosening Only cures in the absence of air, making cleanup of excess product easy Threadlockers produce lubricity to achieve controlled torque during assembly and operation Holds critical clamp load pressures under the most severe environments...

  $8.63
  

  Add to cart View
• 

  Part# 8702-50ML

  MG Chemicals Medium Strength Removable Threadlocker - 50mL

  For fasteners 3/4" or smaller Prevents vibrational loosening Only cures in the absence of air, making cleanup of excess product easy Threadlockers produce lubricity to achieve controlled torque during assembly and operation Holds critical clamp load pressures under the most severe environments...

  $31.56
  

  Add to cart View
• 

  Part# 8341-10ML

  MG Chemicals No Clean Flux Paste - 10mL

  Designed specifically for use with lead free and conventional Sn/Pb alloys Non-conductive, non-tacky residues, so no need for cleaning in most applications Convenient syringe for easy touch up and repair of surface mount assemblies Excellent wettability Thixotropic paste RoHS compliant

  $10.63
  

  Add to cart View
• 

  Part# 8610-60G

  MG Chemicals Non-Silicone Heat Transfer Compound

  Designed for transferring heat away from electrical and electronic devices Use with heat sinks or metal chassis Will not dry or harden Uses synthetic fluids and metal oxide fillers No migration or component contamination RoHS Compliant

  $11.82
  Contact MRO

  Add to cart View
• 

  Part# 862-150ML

  MG Chemicals Peelable Solder Mask - 150mL

  Temporary, peelable mask Thixotropic, synthetic latex designed to withstand fluxing, wave soldering, and cleaning Ammonia-free Quick drying Not corrosive to copper, gold, silver, or pre-soldered surfaces Cured mask can be for masking conformal coatings RoHS Compliant

  $13.47
  Contact MRO

  Add to cart View
• 

  Part# 4228-55ML

  MG Chemicals Red Insulating Varnish - 55mL

  Protect motor windings, small dry type transformers, and coils from arcing, discharge, and oxidation Class F thermal protection (20,000 @ 150°C) High dielectric strength

  $9.98
  

  Add to cart View
• 

  Part# 408B-125ML

  MG Chemicals Rubber Renue - 125mL

  Rejuvinates and conditions rubber Apply with cloth, brush, or swab

  $7.95
  Contact MRO

  Add to cart View
• 

  Part# 422A-340G

  MG Chemicals Silicone Conformal Coating

  Ideal for high temperature environments Flexible finish product Provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock Protects and insulates electrical and electronic components and assemblies UL Recognized, CSA tested, Flame Class 94 V-0

  $22.38
  Contact MRO

  Add to cart View
• 

  Part# 422-55ML

  MG Chemicals Silicone Conformal Coating - 55mL

  Ideal for high temperature environments Flexible finish that provides protective coating for circuit boards against moisture, corrosion, and thermal shock Protects and insulates electrical and electronic components and assemblies Best results obtained by applying to thoroughtly cleaned and dried materials

  $13.56
  

  Add to cart View
• 

  Part# 422B-340G

  MG Chemicals Silicone Conformal Coating UL94V-0 - 340g

  Ideal for high temperature environments Flexible finished product Provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock

  $23.22
  

  Add to cart View
• 

  Part# 8462-85ML

  MG Chemicals Silicone Grease - 85mL

  Dielectric grease lubricant Water repellant and non-melting Provides superior corrosion protection Safe with most plastics and elastomers Prevents high voltage arcing RoHS Compliant

  $17.60
  

  Add to cart View
• 

  Part# 860-150G

  MG Chemicals Silicone Heat Transfer Compound - 150g

  Designed for transferring heat away from electrical and electronic devices Use with heat sinks or metal chassis Will not dry or harden Contains zinc oxides and polydimenthyl siloxane RoHS Compliant

  $18.16
  

  Add to cart View