Neutrik Right Angle 1/4"(M) Mono 2 Pole Professional Phone Plug
- Rugged all-metal housing
- Chuck type strain relief
- Meets all prevailing standards
Categories
- Antennas
- Audio Products
- Battery Products
- PC Boards -Bread Boards
- Capacitors
- Chemical Products
- Connectors
- Diodes - Semis - Transistors
- Fans
- Fuses
- Hardware
- Heat Shrink
- Indicators/LEDs
- Kits
- Power
- Relays
- Resistors
- Signal Splitters
- Soldering Equipment
- Switches
- Terminal Blocks
- Tools
- Wire & Cable
- Wire & Cable Management Accessories
- Boxes / Cases / Racks
- Test Equipment
- ESD
- Clearance
- Prototyping
| Rated Current: |
dependant on mating connector A |
| Rated Voltage: |
50V (insulator) |
| Contact Resistance: |
dependant on mating connector Ω |
| Insulation Reistance: |
>2GΩ initial >1GΩ after dampheat |
| Dielectric Strength: |
1kV DC |
| Cable O.D.: |
4 - 7mm |
| Lifetime: |
>1000 mating cycles |
| Wire Size: |
max. 1mm2 (18AWG) |
| Contacts: |
Solder type |
| Contact Material: |
Brass (CuZn39Pb3) w/ 2µm Ni plating |
| Shell Material: |
Zinc diecast (CnAl4Cu1) w/ Ni plating |
| Insert Material: |
Polyamide (PA 6.6 30% GR) |
| Bushing Material: |
Polyacetal (POM) + PU |
| Strain Relief Material: |
Polyacetal (POM) |
| Solderability: |
Complies with IEC 68-2-20 |
| Temperature Range: |
-20°C to +65°C |
Cart
(empty)
New products
- 3/4" NPT Black Nylon EX-E (SR) Cable Gland For Non-Armoured Cable
- Standard Cable Range: .51" - .71" (13 -18 mm)
- 3/4" NPT Black Nylon Cable Gland
- Sealcon CD21NA-BK high quality black nylon cord...
- M20 Black Nylon EX-E (SR) Cable Gland For Non-Armoured Cable
- Standard Cable Range: .26" - .47" (6.5 - 12 mm)
- 1/2" NPT Black Nylon Cable Gland
- Sealcon CD16NA-GY high quality gray nylon cord...
- 1/2" NPT Gray Nylon Cable Gland - Reduced Cable Range
- Sealcon CD13NR-GY high quality gray nylon cord...