Phoenix QUINT Primary Switched SFB 24VDC/24VDC 10A Converter

Print
View full size

24VDC - 24VDC converter
Primary switched
10A
SFB technology
RoHs/WEEE compliant

More details

10 other products in the same category:

More info

Nominal Input Voltage:	24VDC
Input Voltage Range:	18VDC - 32VDC 14VDC - 18VDC (Consider derating during operation)
Frequency Range:	0Hz (DC)
Current Consumption:	14A (24VDC) typical
Inrush Surge Current	<15A typical
Power Failure Bypass:	>12ms (24VDC)
Input Fuse:	25A internal (device protection)
Permissible Backup Fuses:	B16, B20
Type of Protection:	Transient surge protection
Protective Circuit/Component:	Varistor
Nominal Output Voltage:	24VDC (±1%)
Setting Range of Output Voltage:	18VDC to 29.5VDC (>24V constant capacity)
Output Current:	10A (-25°C to +60°C) 12.5A (w/ POWER BOOST, -25°C to 40°C permanently, UOUT = 24VDC) 60A (SFB technology, 12 ms)
Magnetic Fuse Tripping:	B6, C4
Derating:	+60°C to +70°C (2.5%/K)
Connection in Parallel:	Yes, for redundancy and increased capacity
Connection in Series:	Yes
Max. capacitive Load:	Unlimited
Current Limitation:	~18A
Control Deviation:	<1% (change in load, static 10 - 90%) <2% (change in load, dynamic 10 - 90%) <0.1% (change in input voltage ±10%)
Residual Ripple:	<20mVPP
Peak Switching Voltages:	<10mVPP (20MHz) (Nominal Load)
Max Power Dissipation NO-Load:	1.6W
Power Loss max.	24W (nominal load)
Dimensions (WxHxD):	48 x 130 x 125mm
Width w/ Alternative Assembly:	122mm
Height w/ Alternative Assembly:	130mm 51mm
Efficiency:	>92%
Insulation Voltage Input/Output:	1kV (routine test) 1.5kV (type test)
Degree of Protection:	IP20
Protection Class:	III
MTBF (IEC 61709, SN 29500):	>500000h
Ambient Operating Temperature:	-25°C to +70°C (>60°C derating)
Ambient Storage/Transport Temperature:	-40°C to +85°C
Max. Relative Humidity (operation):	≤95% (at 25°C, no condensation)
Mounting Position:	Horizontal DIN rail NS 35, EN 60715
Assembly Instructions:	Can be aligned: Horizontally 0 mm, vertically 50 mm
Electromagnetic Compatibility:	Conformance with EMC Directive 2004/108/EC
Noise Immunity:	EN 61000-6-2:2005
Standard - Electrical equipment of machines:	EN 60204
Standard - Safety of transformers:	EN 61558-2-17
Standard - Electrical safety:	EN 60950-1/VDE 0805 (SELV)
Shipbuilding Approval:	Germanischer Lloyd (EMC 1)
Standard - Electronic equipment for use in electrical power installations and their assembly into electrical power installations:	EN 50178/VDE 0160 (PELV)
Standard - Safety extra-low voltage:	EN 60950-1 (SELV)
	EN 60204 (PELV)
Standard - Safe isolation:	DIN VDE 0100-410
UL Approvals:	UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950
Input Connection Method:	Pluggable screw connection
Input Conductor Cross Section:	0.2 - 2.5mm² (solid) 0.2 - 2.5mm² (stranded) 24 - 12 AWG/kcmil
Input Stripping Length:	8mm
Input Screw Thread:	M3
Output Connection Method:	Pluggable screw connection
Output Conductor Cross Section:	0.2 - 2.5mm² (solid) 0.2 - 2.5mm² (stranded) 24 - 12AWG/kcmil
Output Stripping Length:	7mm
Signaling Output Name:	DC OK active
Signaling Output Description:	UOUT > 0.9 x UN: High signal
Signaling max. Inrush Current:	<20mA (short-circuit resistant)
Signaling Status Display:	DC OK LED green
Signaling Conductor Cross Section:	0.2 - 2.5mm² (solid) 0.2 - 2.5mm² (stranded) 24 - 12AWG/kcmil
Signaling Tightening Torque:	0.5 - 0.6Nm
Screw Thread:	M3
Output Name:	POWER BOOST, active
Output Description:	IOUT < IN: High signal
Maximum Inrush Current:	<20mA (short-circuit resistant)
Status Display:	BOOST LED yellow/IOUT > IN : LED on
Output Name:	UIN OK, active
Output Description:	UIN > 19.2 V: High signal
Maximum Inrush Current:	≤20mA (short-circuit resistant)
Status Display:	LED "UIN < 19.2 V" yellow/UIN < 19.2 V DC: LED on
Output Name:	DC OK floating
Output Description:	Relay
Output Voltage:	≤30V AC/DC
Maximum Inrush Current:	≤100mA
Note on Status Display:	UOUT > 0.9 x UN: Contact closed