Categories

Linecard

Home>Clearance>Phoenix MTK-P/P

Phoenix MTK-P/P

  • Knife disconnect terminal block
  • Connection type: Screw connection with test socket screws
  • AWG: 24 - 12
  • Nominal current: 16 A
  • Nominal voltage: 400 V
  • Length: 46 mm
  • Width: 5.2 mm
  • Assembly: NS 35/7.5, NS 35/15, NS 32

More details


CAD $6.00

3104013

Contact MRO for availability

General

Number of levels 1
Number of connections 2
Color gray
Insulating material PA
Inflammability class according to UL 94 V0

Dimensions

Width 5.2 mm
Length 46 mm
Height NS 35/7,5 51.5 mm
Height NS 35/15 59 mm
Height NS 32 56 mm

Technical data

Maximum load current 16 A (with 4 mm² conductor cross section)
Rated surge voltage 6 kV
Pollution degree 3
Surge voltage category III
Insulating material group I
Connection in acc. with standard IEC 60947-7-1
Nominal current IN 16 A
Nominal voltage UN 400 V
Open side panel ja
Back of the hand protection guaranteed
Finger protection guaranteed
Power frequency withstand voltage setpoint 2.5 kV
Result of power-frequency withstand voltage test Test passed
Checking the mechanical stability of terminal points (5 x conductor connection) Test passed
Bending test rotation speed 10 rpm
Bending test turns 135
Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
  2.5 mm² / 0.7 kg
  4 mm² / 0.9 kg
Result of bending test Test passed
Conductor cross section tensile test 0.2 mm²
Tractive force setpoint 10 N
Conductor cross section tensile test 2.5 mm²
Tractive force setpoint 50 N
Conductor cross section tensile test 4 mm²
Tractive force setpoint 60 N
Tensile test result Test passed
Setpoint 1 N
Result of tight fit test Test passed
Conductor cross section short circuit testing 4 mm²
Short-time current 0.25 kA
Short circuit stability result Test passed

Connection data

Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 12
Conductor cross section stranded, with ferrule without plastic sleeve min. 0.25 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min. 0.25 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max. 1.5 mm²
2 conductors with same cross section, solid min. 0.2 mm²
2 conductors with same cross section, solid max. 1.5 mm²
2 conductors with same cross section, stranded min. 0.2 mm²
2 conductors with same cross section, stranded max. 1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 1.5 mm²
Cross section with insertion bridge, solid max. 4 mm²
Cross section with insertion bridge, stranded max. 2.5 mm²
Connection method Screw connection with test socket screws
Stripping length 7 mm
Internal cylindrical gage A3
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm



Copyright © 2013 MRO Electronic Supply Ltd.. All Rights Reserved.