Categories

Linecard

MRO Electronic Supply Ltd.
Home>Clearance>Phoenix QUINT-PS-100-240AC/24DC/ 2.5

Phoenix QUINT-PS-100-240AC/24DC/ 2.5

  • DIN rail power supply unit 24 V DC/2.5 A
  • Primary switched-mode
  • 1-phase.

More details


$300.27

2938578

Availability:
Calgary:0 Edmonton:1 Vancouver:0

1 item in stock

Warning: Last items in stock!

30 other products in the same category:

Product description

QUINT POWER is the powerful 60 - 960 W DC power supply unit for universal use. With its wide-range input, single and three-phase versions, and international approval package, this solution is unrivalled. QUINT POWER provides reliable power supply: generously dimensioned capacitors ensure mains buffering of over 20 ms at full load. Full output power is provided by all three-phase devices, even in the event of a permanent phase failure. The Power Boost power reserve easily starts loads with high inrush currents and ensures that fuses are reliably tripped. Preventive function monitoring diagnoses impermissible operating states and minimizes downtimes in your system. Remote monitoring is provided by an active transistor switching output and a floating relay contact. All devices are idling-proof and short-circuit-proof, and are available with a regulated and adjustable output voltage of 12, 24, and 48 V DC with output currents of 2.5, 5, 10, 20, 30, and 40 A. Power supply units for use in Ex zone 2, uninterruptible solutions, AS-i power supply units, and a QUINT diode complete this comprehensive product range.

Input data

Nominal input voltage 100 V AC ... 240 V AC
AC input voltage range 85 V AC ... 264 V AC
DC input voltage range 90 V DC ... 350 V DC
AC frequency range 45 Hz ... 65 Hz
DC frequency range 0 Hz
Current consumption approx. 0.86 A (120 V AC)
  approx. 0.47 A (230 V AC)
Nominal power consumption 60 W
Inrush surge current < 20 A (typical)
Power failure bypass > 30 ms (120 V AC)
  > 130 ms (230 V AC)
Input fuse 5 A (slow-blow, internal)
Type of protection Transient surge protection
Protective circuit/component Varistor

Output data

Nominal output voltage 24 V DC ±1%
Setting range of the output voltage 22.5 V DC ... 28.5 V DC
Output current 2.5 A (up to 60°C)
  3.75 A (with POWER BOOST)
Derating 60 °C (2.5%/K)
Connection in parallel Yes, for redundancy and increased capacity
Connection in series Yes
Max. capacitive load Unlimited
Current limitation Approx. IBOOST = 3.75 A (for short-circuit)
Control deviation < 1 % (change in load, static 10% ... 90%)
  < 2 % (change in load, dynamic 10% ... 90%)
  < 0.1 % (change in input voltage ±10%)
Residual ripple < 10 mVPP (with nominal values)
Peak switching voltages nominal load < 40 mVPP (20 MHz)
Maximum power dissipation NO-Load < 2 W
Power loss nominal load max. < 8 W

General data

Width 55 mm
Height 130 mm
Depth 125 mm
Width with alternative assembly 122 mm
Height with alternative assembly 130 mm
Depth with alternative assembly 58 mm
Net weight 0.85 kg
Operating voltage display Green LED
Efficiency > 86 %
Insulation voltage input/output 4 kV AC (type test)
  2 kV AC (routine test)
Degree of protection IP20
Protection class I, with PE connection
MTBF (IEC 61709, SN 29500) > 500000 h
Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) 95 % (at 25 °C, no condensation)
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions Can be aligned: Horizontally 0 mm, vertically 50 mm
Electromagnetic compatibility Conformance with EMC directive 89/336/EC
Noise emission EN 50081-2
Noise immunity EN 61000-6-2:2005
Standard – Electrical equipment of machines EN 60204
Standard - Safety of transformers EN 61558-2-17
Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)
  EN 61558-2-17
Shipbuilding approval Germanischer Lloyd (EMC 2), ABS
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage EN 60950-1 (SELV)
  EN 60204 (PELV)
Standard - Safe isolation DIN VDE 0100-410
  DIN VDE 0106-1010
Standard – Protection against electric shock DIN 57100-410
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment DIN VDE 0106-101
Standard – Limitation of mains harmonic currents EN 61000-3-2
Standard – Equipment safety GS (tested safety)
Information technology equipment - safety (CB scheme) CB Scheme
UL approvals UL/C-UL Recognized UL 60950
  UL/C-UL listed UL 508
  UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
Surge voltage category III

Connection data, input

Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 12
Stripping length 7 mm
Screw thread M3

Connection data, output

Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 12
Stripping length 7 mm

Signaling

Output name DC OK active
Output description UOUT > 0.9 x UN: High signal
Maximum switching voltage ≤ 24 V
Output voltage + 24 V DC (Signal)
Maximum inrush current ≤ 40 mA
Continuous load current ≤ 40 mA
Status display "DC OK" LED green
Note on status display UOUT < 0.9 x UN: LED flashing
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 12
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Screw thread M3
Output name DC OK floating
Output description Relay contact, UOUT > 0.9 x UN: Contact closed
Maximum switching voltage ≤ 30 V AC/DC
Maximum inrush current ≤ 1 A
Continuous load current ≤ 1 A
Status display "DC OK" LED green



Cart  

No products

Shipping $0.00
Tax $0.00
Total $0.00

Prices are tax included

Cart Check out

Customized Quote

Copyright © 2013 MRO Electronic Supply Ltd.. All Rights Reserved.